Documentation

  lang:   lib:

Socket API

Sockets are the de facto standard API for network programming. That’s why ZeroMQ presents a familiar socket-based API. One thing that make ZeroMQ especially tasty to developers is that it uses different socket types to implement any arbitrary messaging pattern. Furthermore ZeroMQ sockets provide a clean abstraction over the underlying network protocol which hides the complexity of those protocols and makes switching between them very easy.

Key differences to conventional sockets

Generally speaking, conventional sockets present a synchronous interface to either connection-oriented reliable byte streams (SOCK_STREAM), or connection-less unreliable datagrams (SOCK_DGRAM). In comparison, ZeroMQ sockets present an abstraction of an asynchronous message queue, with the exact queueing semantics depending on the socket type in use. Where conventional sockets transfer streams of bytes or discrete datagrams, ZeroMQ sockets transfer discrete messages.

ZeroMQ sockets being asynchronous means that the timings of the physical connection setup and tear down, reconnect and effective delivery are transparent to the user and organized by ZeroMQ itself. Further, messages may be queued in the event that a peer is unavailable to receive them.

Conventional sockets allow only strict one-to-one (two peers), many-to-one (many clients, one server), or in some cases one-to-many (multicast) relationships. With the exception of PAIR sockets, ZeroMQ sockets may be connected to multiple endpoints, while simultaneously accepting incoming connections from multiple endpoints bound to the socket, thus allowing many-to-many relationships.

Socket lifetime

ZeroMQ sockets have a life in four parts, just like BSD sockets:

  • Creating and destroying sockets, which go together to form a karmic circle of socket life

  • Configuring sockets by setting options on them and checking them if necessary

  • Plugging sockets into the network topology by creating ZeroMQ connections to and from them.

  • Using the sockets to carry data by writing and receiving messages on them.

Bind vs Connect

With ZeroMQ sockets it doesn’t matter who binds and who connects. In the above you may have noticed that the server used Bind while the client used Connect. Why is this, and what is the difference?

ZeroMQ creates queues per underlying connection. If your socket is connected to three peer sockets, then there are three messages queues behind the scenes.

With Bind, you allow peers to connect to you, thus you don’t know how many peers there will be in the future and you cannot create the queues in advance. Instead, queues are created as individual peers connect to the bound socket.

With Connect, ZeroMQ knows that there’s going to be at least a single peer and thus it can create a single queue immediately. This applies to all socket types except ROUTER, where queues are only created after the peer we connect to has acknowledge our connection.

Consequently, when sending a message to bound socket with no peers, or a ROUTER with no live connections, there’s no queue to store the message to.

When should I use bind and when connect?

As a general rule use bind from the most stable points in your architecture, and use connect from dynamic components with volatile endpoints. For request/reply, the service provider might be the point where you bind and the clients are using connect. Just like plain old TCP.

If you can’t figure out which parts are more stable (i.e. peer-to-peer), consider a stable device in the middle, which all sides can connect to.

You can read more about this at the ZeroMQ FAQ under the “Why do I see different behavior when I bind a socket versus connect a socket?” section.

High-Water-Mark

The high water mark is a hard limit on the maximum number of outstanding messages ZeroMQ is queuing in memory for any single peer that the specified socket is communicating with.

If this limit has been reached the socket enters an exceptional state and depending on the socket type, ZeroMQ will take appropriate action such as blocking or dropping sent messages. Refer to the individual socket descriptions below for details on the exact action taken for each socket type.

Messaging Patterns

Underneath the brown paper wrapping of ZeroMQ’s socket API lies the world of messaging patterns. ZeroMQ patterns are implemented by pairs of sockets with matching types.

The built-in core ZeroMQ patterns are:

  • Request-reply, which connects a set of clients to a set of services. This is a remote procedure call and task distribution pattern.

  • Pub-sub, which connects a set of publishers to a set of subscribers. This is a data distribution pattern.

  • Pipeline, which connects nodes in a fan-out/fan-in pattern that can have multiple steps and loops. This is a parallel task distribution and collection pattern.

  • Exclusive pair, which connects two sockets exclusively. This is a pattern for connecting two threads in a process, not to be confused with “normal” pairs of sockets.

There are more ZeroMQ patterns that are still in draft state:

  • Client-server, which allows a single ZeroMQ server talk to one or more ZeroMQ clients. The client always starts the conversation, after which either peer can send messages asynchronously, to the other.

  • Radio-dish, which used for one-to-many distribution of data from a single publisher to multiple subscribers in a fan out fashion.

Request-reply pattern

The request-reply pattern is intended for service-oriented architectures of various kinds. It comes in two basic flavors: synchronous (REQ and REP socket types), and asynchronous socket types (DEALER and ROUTER socket types), which may be mixed in various ways.

The request-reply pattern is formally defined by RFC 28/REQREP.

REQ socket

A REQ socket is used by a client to send requests to and receive replies from a service. This socket type allows only an alternating sequence of sends and subsequent receive calls. A REQ socket may be connected to any number of REP or ROUTER sockets. Each request sent is round-robined among all connected services, and each reply received is matched with the last issued request. It is designed for simple request-reply models where reliability against failing peers is not an issue.

If no services are available, then any send operation on the socket will block until at least one service becomes available. The REQ socket will not discard any messages.

Summary of characteristics:

Compatible peer sockets REP, ROUTER
Direction Bidirectional
Send/receive pattern Send, Receive, Send, Receive, …
Outgoing routing strategy Round-robin
Incoming routing strategy Last peer
Action in mute state Block

REP socket

A REP socket is used by a service to receive requests from and send replies to a client. This socket type allows only an alternating sequence of receive and subsequent send calls. Each request received is fair-queued from among all clients, and each reply sent is routed to the client that issued the last request. If the original requester does not exist any more the reply is silently discarded.

Summary of characteristics:

Compatible peer sockets REQ, DEALER
Direction Bidirectional
Send/receive pattern Receive, Send, Receive, Send …
Outgoing routing strategy Fair-robin
Incoming routing strategy Last peer

DEALER socket

The DEALER socket type talks to a set of anonymous peers, sending and receiving messages using round-robin algorithms. It is reliable, insofar as it does not drop messages. DEALER works as an asynchronous replacement for REQ, for clients that talk to REP or ROUTER servers. Message received by a DEALER are fair-queued from all connected peers.

When a DEALER socket enters the mute state due to having reached the high water mark for all peers, or if there are no peers at all, then any send operation on the socket will block until the mute state ends or at least one peer becomes available for sending; messages are not discarded.

When a DEALER socket is connected to a REP socket message sent must contain an empty frame as first part of the message (the delimiter), followed by one or more body parts.

Summary of characteristics:

Compatible peer sockets ROUTER, REP, DEALER
Direction Bidirectional
Send/receive pattern Unrestricted
Outgoing routing strategy Round-robin
Incoming routing strategy Fair-queued
Action in mute state Block

ROUTER socket

The ROUTER socket type talks to a set of peers, using explicit addressing so that each outgoing message is sent to a specific peer connection. ROUTER works as an asynchronous replacement for REP, and is often used as the basis for servers that talk to DEALER clients.

When receiving messages a ROUTER socket will prepend a message part containing the routing id of the originating peer to the message before passing it to the application. Messages received are fair-queued from among all connected peers. When sending messages a ROUTER socket will remove the first part of the message and use it to determine the routing id of the peer the message shall be routed to. If the peer does not exist anymore, or has never existed, the message shall be silently discarded.

When a ROUTER socket enters the mute state due to having reached the high water mark for all peers, then any messages sent to the socket will be dropped until the mute state ends. Likewise, any messages routed to a peer for which the individual high water mark has been reached will also be dropped.

When a REQ socket is connected to a ROUTER socket, in addition to the routing id of the originating peer each message received shall contain an empty delimiter message part. Hence, the entire structure of each received message as seen by the application becomes: one or more routing id parts, delimiter part, one or more body parts. When sending replies to a REQ socket the application must include the delimiter part.

Summary of characteristics:

Compatible peer sockets DEALER, REQ, ROUTER
Direction Bidirectional
Send/receive pattern Unrestricted
Outgoing routing strategy See text
Incoming routing strategy Fair-queued
Action in mute state Drop (see text)

Publish-subscribe pattern

The publish-subscribe pattern is used for one-to-many distribution of data from a single publisher to multiple subscribers in a fan out fashion.

The publish-subscribe pattern is formally defined by RFC 29/PUBSUB.

ZeroMQ comes with support for Pub/Sub by way of four socket types:

  • PUB Socket Type
  • XPUB Socket Type
  • SUB Socket Type
  • XSUB Socket Type

Topics

ZeroMQ uses multipart messages to convey topic information. Topics are expressed as an array of bytes, though you may use a string and with suitable text encoding.

A publisher must include the topic in the message’s’ first frame, prior to the message payload. For example, to publish a status message to subscribers of the status topic:

//  Send a message on the 'status' topic
zmq_send (pub, "status", 6, ZMQ_SNDMORE);
zmq_send (pub, "All is well", 11, 0);
//  Send a message on the 'status' topic
zstr_sendx (pub, "status", "All is well", NULL);
Example pubsub_topics_pub is missing for zmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/zmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
//  Send a message on the 'status' topic
#include <string>
#include <iostream>

#include <zmq.hpp>

int main()
{
    // initialize the zmq context with a single IO thread
    zmq::context_t context{1};

    // construct a PUB (publisher) socket and connect to interface
    zmq::socket_t publisher{context, zmq::socket_type::pub};
    publisher.bind("tcp://*:5555");

    // Send a multipart messages forever
    while(true){
        // Each consists of a topic envelope and content
        publisher.send(zmq::str_buffer("status"), zmq::send_flags::sndmore);
        publisher.send(zmq::str_buffer("Message in status"));
    }

    return 0;
}
Example pubsub_topics_pub is missing for azmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/azmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for czmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/czmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for fbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/fbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
//  Send a message on the 'status' topic
pub.SendMoreFrame("status").SendFrame("All is well");
Example pubsub_topics_pub is missing for clrzmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/clrzmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for dartzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/dart/dartzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for Chumak. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/chumak
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for ezmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/ezmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for erlang-czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/erlang-czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for FsNetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fsnetmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for fszmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fszmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for zmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/zmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for goczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/goczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for zeromq-haskell. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/haskell/zeromq-haskell
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
//  Send a message on the 'status' topic
pub.sendMore("Status");
pub.send("All is well");
Example pubsub_topics_pub is missing for JZMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for jczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
//  Send a message on the 'status' topic
pub.send(['status', 'All is well']);
Example pubsub_topics_pub is missing for perlzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/perl/perlzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
import signal
import time
import zmq


signal.signal(signal.SIGINT, signal.SIG_DFL)

context = zmq.Context()
socket = context.socket(zmq.PUB)
socket.bind('tcp://*:5555')

for i in range(5):
    socket.send(b'status 5')
    socket.send(b'All is well')
    time.sleep(1)
Example pubsub_topics_pub is missing for rbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/ruby/rbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for rust-zmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/rust/rust-zmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md
Example pubsub_topics_pub is missing for zzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/zig/zzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_pub.md
    $example_dir/pubsub_topics_pub.md

Subscribers specify which topics they are interested in by setting the ZMQ_SUBSCRIBE option on the subscriber socket:

//  Subscribe to the 'status' topic
zmq_setsockopt (sub, ZMQ_SUBSCRIBE, "status", strlen ("status"));

Subscribers specify which topics they are interested in by calling the zsock_set_subscribe method with the subscriber socket:

//  Subscribe to the 'status'
zsock_set_subscribe(sub, "status");
Example pubsub_topics_sub is missing for zmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/zmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md

Subscribers specify which topics they are interested in …

//  Subscribe to the 'status'
#include <string>
#include <iostream>
#include <vector>

#include <zmq.hpp>
#include <zmq_addon.hpp>

int main()
{
    // initialize the zmq context with a single IO thread
    zmq::context_t context{1};

    // construct a SUB (subscriber) socket and connect to interface
    zmq::socket_t subscriber{context, zmq::socket_type::sub};
    subscriber.connect("tcp://localhost:5555");
    
    // set topics you want to sub
    subscriber.set(zmq::sockopt::subscribe, "status");

    while(true){
        // Receive all parts of the message
        std::vector<zmq::message_t> recv_msgs;
        zmq::recv_result_t result =
            zmq::recv_multipart(subscriber, std::back_inserter(recv_msgs));
        assert(result && "recv failed");
        assert(*result == 2);

        std::cout << "Subscriber: [" << recv_msgs[0].to_string() << "] "
                  << recv_msgs[1].to_string() << std::endl;
    }

    return 0;
}
Example pubsub_topics_sub is missing for azmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/azmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for czmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/czmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for fbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/fbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md

Subscribers specify which topics they are interested in via the Subscribe method of SubscriberSocket:

//  Subscribe to the 'status'
sub.Subscribe("status");
Example pubsub_topics_sub is missing for clrzmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/clrzmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for dartzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/dart/dartzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for Chumak. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/chumak
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for ezmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/ezmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for erlang-czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/erlang-czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for FsNetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fsnetmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for fszmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fszmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for zmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/zmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for goczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/goczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for zeromq-haskell. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/haskell/zeromq-haskell
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md

Subscribers specify which topics they are interested in via the subscribe method of Socket class:

//  Subscribe to the 'status'
sub.subscribe("status");
Example pubsub_topics_sub is missing for JZMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for jczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md

Subscribers specify which topics they are interested in …

//  Subscribe to the 'status'
sub.subscribe('status');
Example pubsub_topics_sub is missing for perlzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/perl/perlzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md

Subscribers specify which topics they are interested in by setting the ZMQ_SUBSCRIBE option on the subscriber socket:

import signal
import zmq


signal.signal(signal.SIGINT, signal.SIG_DFL)

context = zmq.Context()

socket = context.socket(zmq.SUB)
socket.connect('tcp://localhost:5555')
socket.setsockopt(zmq.SUBSCRIBE, b'status')

while True:
    message = socket.recv_multipart()
    print(f'Received: {message}')
Example pubsub_topics_sub is missing for rbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/ruby/rbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for rust-zmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/rust/rust-zmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md
Example pubsub_topics_sub is missing for zzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/zig/zzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/pubsub_topics_sub.md
    $example_dir/pubsub_topics_sub.md

A subscriber socket can have multiple subscription filters.

A message’s topic is compared against subscribers’ subscription topics using a prefix check.

That is, a subscriber who subscribed to topic would receive messages with topics:

  • topic
  • topic/subtopic
  • topical

However it would not receive messages with topics:

  • topi
  • TOPIC (remember, it’s a byte-wise comparison)

A consequence of this prefix matching behaviour is that you can receive all published messages by subscribing with an empty topic string.

PUB socket

A PUB socket is used by a publisher to distribute data. Messages sent are distributed in a fan out fashion to all connected peers. This socket type is not able to receive any messages.

When a PUB socket enters the mute state due to having reached the high water mark for a subscriber, then any messages that would be sent to the subscriber in question shall instead be dropped until the mute state ends. The send function does never block for this socket type.

Summary of characteristics:

Compatible peer sockets SUB, XSUB
Direction Unidirectional
Send/receive pattern Send only
Incoming routing strategy N/A
Outgoing routing strategy Fan out
Action in mute state Drop

SUB socket

A SUB socket is used by a subscriber to subscribe to data distributed by a publisher. Initially a SUB socket is not subscribed to any messages. The send function is not implemented for this socket type.

Summary of characteristics:

Compatible peer sockets PUB, XPUB
Direction Unidirectional
Send/receive pattern Receive only
Incoming routing strategy Fair-queued
Outgoing routing strategy N/A

XPUB socket

Same as PUB except that you can receive subscriptions from the peers in form of incoming messages. Subscription message is a byte 1 (for subscriptions) or byte 0 (for unsubscriptions) followed by the subscription body. Messages without a sub/unsub prefix are also received, but have no effect on subscription status.

Summary of characteristics:

Compatible peer sockets ZMQ_SUB, ZMQ_XSUB
Direction Unidirectional
Send/receive pattern Send messages, receive subscriptions
Incoming routing strategy N/A
Outgoing routing strategy Fan out
Action in mute state Drop

XSUB socket

Same as SUB except that you subscribe by sending subscription messages to the socket. Subscription message is a byte 1 (for subscriptions) or byte 0 (for unsubscriptions) followed by the subscription body. Messages without a sub/unsub prefix may also be sent, but have no effect on subscription status.

Summary of characteristics:

Compatible peer sockets ZMQ_PUB, ZMQ_XPUB
Direction Unidirectional
Send/receive pattern Receive messages, send subscriptions
Incoming routing strategy Fair-queued
Outgoing routing strategy N/A
Action in mute state Drop

Pipeline pattern

The pipeline pattern is intended for task distribution, typically in a multi-stage pipeline where one or a few nodes push work to many workers, and they in turn push results to one or a few collectors. The pattern is mostly reliable insofar as it will not discard messages unless a node disconnects unexpectedly. It is scalable in that nodes can join at any time.

The pipeline pattern is formally defined by RFC 30/PIPELINE.

ZeroMQ comes with support for pipelining by way of two socket types:

  • PUSH Socket Type
  • PULL Socket Type

PUSH socket

The PUSH socket type talks to a set of anonymous PULL peers, sending messages using a round-robin algorithm. The receive operation is not implemented for this socket type.

When a PUSH socket enters the mute state due to having reached the high water mark for all downstream nodes, or if there are no downstream nodes at all, then any send operations on the socket will block until the mute state ends or at least one downstream node becomes available for sending; messages are not discarded.

Summary of characteristics:

Compatible peer sockets PULL
Direction Unidirectional
Send/receive pattern Send only
Incoming routing strategy N/A
Outgoing routing strategy Round-robin
Action in mute state Block

PULL socket

The PULL socket type talks to a set of anonymous PUSH peers, receiving messages using a fair-queuing algorithm.

The send operation is not implemented for this socket type.

Summary of characteristics:

Compatible peer sockets PUSH
Direction Unidirectional
Send/receive pattern Receive only
Incoming routing strategy Fair-queued
Outgoing routing strategy N/A
Action in mute state Block

Exclusive pair pattern

PAIR is not a general-purpose socket but is intended for specific use cases where the two peers are architecturally stable. This usually limits PAIR to use within a single process, for inter-thread communication.

The exclusive pair pattern is formally defined by 31/EXPAIR.

PAIR socket

A socket of type PAIR can only be connected to a single peer at any one time. No message routing or filtering is performed on messages sent over a PAIR socket.

When a PAIR socket enters the mute state due to having reached the high water mark for the connected peer, or if no peer is connected, then any send operations on the socket will block until the peer becomes available for sending; messages are not discarded.

While PAIR sockets can be used over transports other than inproc, their inability to auto-reconnect coupled with the fact that new incoming connections will be terminated while any previous connections (including ones in a closing state) exist makes them unsuitable for TCP in most cases.

Client-server pattern

Note: This pattern is still in draft state and thus might not be supported by the zeromq library you’re using!

The client-server pattern is used to allow a single SERVER server talk to one or more CLIENT clients. The client always starts the conversation, after which either peer can send messages asynchronously, to the other.

The client-server pattern is formally defined by RFC 41/CLISRV.

CLIENT socket

The CLIENT socket type talks to one or more SERVER peers. If connected to multiple peers, it scatters sent messages among these peers in a round-robin fashion. On reading, it reads fairly, from each peer in turn. It is reliable, insofar as it does not drop messages in normal cases.

If the CLIENT socket has established a connection, send operations will accept messages, queue them, and send them as rapidly as the network allows. The outgoing buffer limit is defined by the high water mark for the socket. If the outgoing buffer is full, or if there is no connected peer, send operations will block, by default. The CLIENT socket will not drop messages.

Summary of characteristics:

Compatible peer sockets SERVER
Direction Bidirectional
Send/receive pattern Unrestricted
Outgoing routing strategy Round-robin
Incoming routing strategy Fair-queued
Action in mute state Block

SERVER socket

The SERVER socket type talks to zero or more CLIENT peers. Each outgoing message is sent to a specific peer CLIENT. A SERVER socket can only reply to an incoming message: the CLIENT peer must always initiate a conversation.

Each received message has a routing_id that is a 32-bit unsigned integer. To send a message to a given CLIENT peer the application must set the peer’s routing_id on the message.

Example clisrv is missing for libzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/c/libzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/c/czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for zmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/zmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for cppzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/cppzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for azmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/azmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for czmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/czmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for fbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/fbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for NetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/netmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for clrzmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/clrzmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for dartzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/dart/dartzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for Chumak. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/chumak
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for ezmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/ezmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for erlang-czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/erlang-czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for FsNetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fsnetmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for fszmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fszmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for zmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/zmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for goczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/goczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for zeromq-haskell. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/haskell/zeromq-haskell
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for JeroMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jeromq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for JZMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for jczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for zeromqjs. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/nodejs/zeromqjs
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for perlzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/perl/perlzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for Pyzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/python/pyzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for rbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/ruby/rbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for rust-zmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/rust/rust-zmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md
Example clisrv is missing for zzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/zig/zzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/clisrv.md
    $example_dir/clisrv.md

If the routing_id is not specified, or does not refer to a connected client peer, the send call will fail. If the outgoing buffer for the client peer is full, the send call will block. The SERVER socket will not drop messages in any case.

Summary of characteristics:

Compatible peer sockets CLIENT
Direction Bidirectional
Send/receive pattern Unrestricted
Outgoing routing strategy See text
Incoming routing strategy Fair-queued
Action in mute state Fail

Radio-dish pattern

Note: This pattern is still in draft state and thus might not be supported by the zeromq library you’re using!

The radio-dish pattern is used for one-to-many distribution of data from a single publisher to multiple subscribers in a fan out fashion.

Radio-dish is using groups (vs Pub-sub topics), Dish sockets can join a group and each message sent by Radio sockets belong to a group.

Groups are null terminated strings limited to 255 bytes in length (including null). Each group character must be one byte with allowed values 1-255.

Groups are matched using exact matching (vs prefix matching of PubSub).

RADIO socket

A RADIO socket is used by a publisher to distribute data. Each message belongs to a group. Messages are distributed to all members of a group. The receive operation is not implemented for this socket type.

Example raddsh_radio_example is missing for libzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/c/libzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/c/czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for zmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/zmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
#include <chrono>
#include <cstdlib>
#include <iostream>
#include <string>
#include <thread>
#include <zmq.hpp>

int main() {
  // Initialize the zmq context with a single IO thread
  zmq::context_t context{1};

  // Construct a Radio socket and connect to interface.
  zmq::socket_t radio{context, zmq::socket_type::radio};
  radio.bind("tcp://*:5555");

  // Send messages forever, alternating between 3 groups.
  for (uint32_t i = 1; true; i = (i % 3 == 0) ? 1 : i + 1) {
    std::string group = "group" + std::to_string(i);
    std::string payload = "This is for " + group;
    zmq::message_t msg{payload};
    msg.set_group(group.c_str());
    radio.send(msg, zmq::send_flags::none);
    std::cout << "Sent a message to " << group << "\n";
    std::this_thread::sleep_for(std::chrono::seconds(1));
  }

  return EXIT_SUCCESS;
}
Example raddsh_radio_example is missing for azmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/azmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for czmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/czmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for fbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/fbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for NetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/netmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for clrzmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/clrzmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for dartzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/dart/dartzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for Chumak. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/chumak
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for ezmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/ezmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for erlang-czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/erlang-czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for FsNetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fsnetmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for fszmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fszmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for zmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/zmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for goczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/goczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for zeromq-haskell. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/haskell/zeromq-haskell
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for JeroMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jeromq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for JZMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for jczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for zeromqjs. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/nodejs/zeromqjs
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for perlzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/perl/perlzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for Pyzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/python/pyzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for rbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/ruby/rbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for rust-zmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/rust/rust-zmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md
Example raddsh_radio_example is missing for zzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/zig/zzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_radio_example.md
    $example_dir/raddsh_radio_example.md

When a RADIO socket enters the mute state due to having reached the high water mark for a subscriber, then any messages that would be sent to the subscriber in question will instead be dropped until the mute state ends. The send operation will never block for this socket type.

Summary of characteristics:

Compatible peer sockets DISH
Direction Unidirectional
Send/receive pattern Send only
Incoming routing strategy N/A
Outgoing routing strategy Fan out
Action in mute state Drop

DISH socket

A DISH socket is used by a subscriber to subscribe to groups distributed by a RADIO. Initially a DISH socket is not subscribed to any groups. The send operations are not implemented for this socket type.

Example raddsh_dish_example is missing for libzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/c/libzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/c/czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for zmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/zmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
#include <cstdlib>
#include <iostream>
#include <zmq.hpp>

int main() {
  // Initialize the zmq context with a single IO thread
  zmq::context_t context{1};

  // Construct a Dish socket and connect to interface
  zmq::socket_t dish{context, zmq::socket_type::dish};
  dish.connect("tcp://localhost:5555");

  // Join message groups
  dish.join("group1");
  dish.join("group2");

  // Receive messages forever
  while (true) {
    std::cout << "Waiting to receive...\n";
    zmq::message_t msg;
    dish.recv(msg, zmq::recv_flags::none);
    std::cout << "Received a message: " << msg.to_string() << "\n";
  }

  return EXIT_SUCCESS;
}
Example raddsh_dish_example is missing for azmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/azmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for czmqpp. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/czmqpp
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for fbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/cpp/fbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for NetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/netmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for clrzmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/csharp/clrzmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for dartzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/dart/dartzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for Chumak. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/chumak
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for ezmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/ezmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for erlang-czmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/erlang/erlang-czmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for FsNetMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fsnetmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for fszmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/fsharp/fszmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for zmq4. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/zmq4
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for goczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/go/goczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for zeromq-haskell. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/haskell/zeromq-haskell
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for JeroMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jeromq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for JZMQ. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for jczmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/java/jczmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for zeromqjs. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/nodejs/zeromqjs
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for perlzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/perl/perlzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for Pyzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/python/pyzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for rbzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/ruby/rbzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for rust-zmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/rust/rust-zmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md
Example raddsh_dish_example is missing for zzmq. Would you like to contribute it? Then follow the steps below:

    git clone https://github.com/zeromq/zeromq.org
    example_dir=content/docs/examples/zig/zzmq
    cd zeromq.org && mkdir -p $example_dir
    [ -s $example_dir/index.md ] || cat >$example_dir/index.md <<'EOF'
---
headless: true
---
EOF
    cp archetypes/examples/raddsh_dish_example.md
    $example_dir/raddsh_dish_example.md

Summary of characteristics:

Compatible peer sockets RADIO
Direction Unidirectional
Send/receive pattern Receive only
Incoming routing strategy Fair-queued
Outgoing routing strategy N/A